The Good:
I am now able to install openwrt and have WAN/LAN and WiFi working like a standard router. In addition I still have about 11 Mb of free space on the flash to install anything I want. I am not sure what yet, but there is room.
The Bad:
I am still not able to enable the Si3210 chipset as an FXS interface. I am not sure if I will be able to achieve my original goal: All in one asterisk pbx with 2 build in FXS ports.
The Ugly:
Despite successfully setting up my openwrt development environment and compiling my own openWRT using these instructions I found that the WGR826V is very close to the WRT300nV2 hardware-wise which already has official support from the OpenWRT team. The main difference besides the FXS chip is the use of a different mini-pci wifi card (ar5416 or ar5418) on the WRT300nv2. This can be easily fixed once the router is up and running. I decided to instead of creating my own fork, I would use the WRT300nV2 image provided by the developers.
Now to the good stuff:
Just for references, my dev machine is now running Ubuntu 14.04 LTS.
Since I had erased and modified the flash on the router while experimenting different things I needed to re-install redboot. Luckily I had made backups. All I needed was download the Big Endian version of the backups from below.
If you still have redboot running, feel free to skip this next step:
Re-installing redboot:
For this step I used my home-brew jtag cable and the urjtag software from the repository.
root@tech:/home/tech# jtag
UrJTAG 0.10 #2007
Copyright (C) 2002, 2003 ETC s.r.o.
Copyright (C) 2007, 2008, 2009 Kolja Waschk and the respective authors
UrJTAG is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
There is absolutely no warranty for UrJTAG.
warning: UrJTAG may damage your hardware!
Type "quit" to exit, "help" for help.
jtag> cable wiggler parallel 0x378
Initializing parallel port at 0x378
jtag> detect
IR length: 7
Chain length: 1
Device Id: 00011001001001110111000000010011 (0x19277013)
Manufacturer: Intel (0x013)
Part(0): IXP425-266MHz (0x9277)
Stepping: B0
Filename: /usr/share/urjtag/intel/ixp425/ixp425
jtag> detectflash 0
Query identification string:
Primary Algorithm Command Set and Control Interface ID Code: 0x0001 (Intel/Shar p Extended Command Set)
Alternate Algorithm Command Set and Control Interface ID Code: 0x0000 (null)
Query system interface information:
Vcc Logic Supply Minimum Write/Erase or Write voltage: 2700 mV
Vcc Logic Supply Maximum Write/Erase or Write voltage: 3600 mV
Vpp [Programming] Supply Minimum Write/Erase voltage: 0 mV
Vpp [Programming] Supply Maximum Write/Erase voltage: 0 mV
Typical timeout per single byte/word program: 256 us
Typical timeout for maximum-size multi-byte program: 256 us
Typical timeout per individual block erase: 2048 ms
Typical timeout for full chip erase: 0 ms
Maximum timeout for byte/word program: 1024 us
Maximum timeout for multi-byte program: 1024 us
Maximum timeout per individual block erase: 16384 ms
Maximum timeout for chip erase: 0 ms
Device geometry definition:
Device Size: 16777216 B (16384 KiB, 16 MiB)
Flash Device Interface Code description: 0x0002 (x8/x16)
Maximum number of bytes in multi-byte program: 32
Number of Erase Block Regions within device: 1
Erase Block Region Information:
Region 0:
Erase Block Size: 131072 B (128 KiB)
Number of Erase Blocks: 128
jtag> eraseflash 0x0 128
Manufacturer: Intel
Chip: 28F128J3A
Erasing 128 Flash blocks from address 0x0
(100% Completed) FLASH Block 127 : Unlocking ... Erasing ... Ok.
Erasing Completed.
jtag> endian
Endianness for external files: little
jtag> endian big
jtag> endian
Endianness for external files: big
jtag> flashmem 0x0 RedBoot-BE.img
Manufacturer: Intel
Chip: 28F128J3A
program:
block 0 unlocked
erasing block 0: 0
addr: 0x0001F000
block 1 unlocked
erasing block 1: 0
addr: 0x0003FFFE
verify:
addr: 0x0003FFFE
Done.
jtag>
jtag> quit
root@tech:/home/tech#
After redboot:
For this step I used an USB-to-serial cable, minicom, tftpd and the zImage/rootfs images from this website.
At the moment of this post the latest openwrt release was Chaos Calmer 15.05 RC3. You will want the IXP4xx -> Generic architecture and then download WRT300nV2 for the zImage and the generic-squashfs.img file for the rootfs. Copy those files to your tftpd directory.
I configured redboot to access and work on my network, you may want to change the IP details to match your environment. Make sure to connect the ethernet cable to any of the LAN ports of the router.
I configured redboot to access and work on my network, you may want to change the IP details to match your environment. Make sure to connect the ethernet cable to any of the LAN ports of the router.
+starting api entry
FLASH configuration checksum error or invalid key
Ethernet eth0: MAC address 00:03:47:df:32:a8
IP: 0.0.0.0/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0, DNS server IP: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 1.92p1 - built 14:07:09, Oct 8 2004
Bootloader version 1.1
Platform: Intel Generic Residential Gateway (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x02000000, 0x0001e5c0-0x01fdd000 available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
RedBoot> fis free
0x50040000 .. 0x51000000
RedBoot>
RedBoot> fconfig
Run script at boot: false
Use BOOTP for network configuration: false
Gateway IP address: 192.168.0.1
Local IP address: 192.168.0.190
Local IP address mask: 255.255.255.0
Product Info: WGR826V
Default server IP address: 192.168.0.180
Version Info: 1
Console baud rate: 115200
DNS server IP address: 8.8.8.8
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
Default network device: npe_eth0
Network hardware address [MAC] for NPE eth0: 0x00:0x03:0x47:0xDF:0x32:0xA8
Network hardware address [MAC] for NPE eth1: 0x00:0x03:0x47:0xDF:0x32:0xAA
... Unlock from 0x50fc0000-0x50fc1000: .
... Erase from 0x50fc0000-0x50fc1000: .
... Program from 0x01fde000-0x01fdf000 at 0x50fc0000: .
... Lock from 0x50fc0000-0x50fc1000: .
RedBoot> fis init -f
*** Initialize FLASH Image System
... Erase from 0x50040000-0x50fc0000: .......................................................................................................................
... Erase from 0x50fe0000-0x50fe0000:
... Erase from 0x51000000-0x51000000:
... Unlock from 0x50fe0000-0x51000000: .
... Erase from 0x50fe0000-0x51000000: .
... Program from 0x01fdf000-0x01fff000 at 0x50fe0000: .
... Lock from 0x50fe0000-0x51000000: .
RedBoot> load -r -b %{FREEMEMLO} openwrt-ixp4xx-generic-wrt300nv2-zImage
Using default protocol (TFTP)
Raw file loaded 0x0001e800-0x0014a2af, assumed entry at 0x0001e800
RedBoot> fis create zImage
arg1 = fis, arg2 = create, arg3 = zImage
... Erase from 0x50040000-0x50180000: ..........
... Program from 0x0001e800-0x0014a2b0 at 0x50040000: ..........
... Unlock from 0x50fe0000-0x51000000: .
... Erase from 0x50fe0000-0x51000000: .
... Program from 0x01fdf000-0x01fff000 at 0x50fe0000: .
... Lock from 0x50fe0000-0x51000000: .
RedBoot> load -r -b %{FREEMEMLO} openwrt-ixp4xx-generic-squashfs.img
Using default protocol (TFTP)
Raw file loaded 0x0001e800-0x001fe7ff, assumed entry at 0x0001e800
RedBoot> fis create rootfs
arg1 = fis, arg2 = create, arg3 = rootfs
... Erase from 0x50180000-0x50360000: ...............
... Program from 0x0001e800-0x001fe800 at 0x50180000: ...............
... Unlock from 0x50fe0000-0x51000000: .
... Erase from 0x50fe0000-0x51000000: .
... Program from 0x01fdf000-0x01fff000 at 0x50fe0000: .
... Lock from 0x50fe0000-0x51000000: .
RedBoot>
RedBoot> reset
First openwrt boot:
The first boot will take longer. The root file-system is automatically re-sized to fit the free flash available space.
... Resetting.
+starting api entry
Ethernet eth0: MAC address 00:03:47:df:32:a8
IP: 192.168.0.190/255.255.255.0, Gateway: 192.168.0.1
Default server: 192.168.0.180, DNS server IP: 8.8.8.8
RedBoot(tm) bootstrap and debug environment [ROM]
Red Hat certified release, version 1.92p1 - built 14:07:09, Oct 8 2004
Bootloader version 1
Platform: Intel Generic Residential Gateway (XScale)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x00000000-0x02000000, 0x0001e5c0-0x01fdd000 available
FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each.
RedBoot> fis load zImage
RedBoot> exec
Using base address 0x0001e800 and length 0x0012bab0
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.18.21 (thepeople@trabant) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46802) ) #1 Mon Sep 7 16:16:48 CEST 2015
[ 0.000000] CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=000039ff
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Linksys WRT300N v2
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Memory: 28868K/32768K available (2414K kernel code, 133K rwdata, 680K rodata, 128K init, 183K bss, 3900K reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xc2800000 - 0xff000000 ( 968 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc2000000 ( 32 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc030dd7c (3096 kB)
[ 0.000000] .init : 0xc030e000 - 0xc032e000 ( 128 kB)
[ 0.000000] .data : 0xc032e000 - 0xc034f4d0 ( 134 kB)
[ 0.000000] .bss : 0xc034f4d0 - 0xc037d460 ( 184 kB)
[ 0.000000] NR_IRQS:64
[ 0.000032] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 64425153520ns
[ 0.000743] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.070202] pid_max: default: 32768 minimum: 301
[ 0.070745] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.070792] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.072489] CPU: Testing write buffer coherency: ok
[ 0.073567] Setting up static identity map for 0x10360 - 0x103b0
[ 0.080709] NET: Registered protocol family 16
[ 0.082635] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.085030] IXP4xx: Using 16MiB expansion bus window size
[ 0.087196] PCI: IXP4xx is host
[ 0.087245] PCI: IXP4xx Using direct access for memory space
[ 0.087651] PCI host bridge to bus 0000:00
[ 0.087725] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.087777] pci_bus 0000:00: root bus resource [mem 0x48000000-0x4bffffff]
[ 0.087823] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 0.088886] PCI: bus0: Fast back to back transfers disabled
[ 0.089078] pci 0000:00:01.0: BAR 0: assigned [mem 0x48000000-0x48001fff]
[ 0.106515] Switched to clocksource OSTS
[ 0.110483] NET: Registered protocol family 2
[ 0.113462] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.113564] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.113637] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.113896] TCP: reno registered
[ 0.113937] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.114009] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.114766] NET: Registered protocol family 1
[ 0.115894] IXP4xx Queue Manager initialized.
[ 0.119139] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.124513] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.124596] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.125760] msgmni has been set to 56
[ 0.127322] io scheduler noop registered
[ 0.127387] io scheduler deadline registered (default)
[ 0.246277] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.257252] console [ttyS0] disabled
[ 0.257397] serial8250.0: ttyS0 at MMIO 0xc8001000 (irq = 13, base_baud = 921600) is a XScale
[ 0.614349] console [ttyS0] enabled
[ 0.622141] IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000089 Chip ID 0x000018
[ 0.632578] Intel/Sharp Extended Query Table at 0x0031
[ 0.637820] Intel/Sharp Extended Query Table at 0x0031
[ 0.643021] Using buffer write method
[ 0.646734] cfi_cmdset_0001: Erase suspend on write enabled
[ 0.652722] Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0xfe0000
[ 0.779584] 5 RedBoot partitions found on MTD device IXP4XX-Flash.0
[ 0.785894] Creating 5 MTD partitions on "IXP4XX-Flash.0":
[ 0.791561] 0x000000000000-0x000000040000 : "RedBoot"
[ 0.799700] 0x000000040000-0x000000180000 : "zImage"
[ 0.807500] 0x000000180000-0x000000fc0000 : "rootfs"
[ 0.815190] mtd: device 2 (rootfs) set to be root filesystem
[ 0.821082] 1 squashfs-split partitions found on MTD device rootfs
[ 0.827330] 0x000000340000-0x000000fc0000 : "rootfs_data"
[ 0.835469] 0x000000fc0000-0x000000fc1000 : "RedBoot config"
[ 0.844034] 0x000000fe0000-0x000001000000 : "FIS directory"
[ 1.122608] libphy: IXP4xx MII Bus: probed
[ 1.129349] eth0: MII PHY 32 on NPE-B
[ 1.135683] eth1: MII PHY 1 on NPE-C
[ 1.140711] i2c /dev entries driver
[ 1.145454] ixp4xx_wdt: timer heartbeat 60 sec
[ 1.151726] TCP: cubic registered
[ 1.155115] NET: Registered protocol family 17
[ 1.159960] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.172822] Bridge firewalling registered
[ 1.176937] 8021q: 802.1Q VLAN Support v1.8
[ 1.181449] XScale DSP coprocessor detected.
[ 1.198765] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.219572] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.227535] Freeing unused kernel memory: 128K (c030e000 - c032e000)
[ 3.233783] init: Console is alive
[ 3.237861] init: - watchdog -
[ 5.297520] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 37.450754] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 37.487483] procd: - early -
[ 37.490642] procd: - watchdog -
[ 40.399376] procd: - ubus -
[ 41.404373] random: ubusd urandom read with 64 bits of entropy available
[ 41.436090] procd: - init -
Please press Enter to activate this console.
[ 45.290014] NET: Registered protocol family 10
[ 45.340212] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 45.395728] Loading modules backported from Linux version master-2015-07-21-0-g47cd203
[ 45.403788] Backport generated by backports.git backports-20150626-0-gc1a4168
[ 45.430939] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 45.468032] nf_conntrack version 0.5.0 (453 buckets, 1812 max)
[ 45.662670] xt_time: kernel timezone is -0000
[ 45.733895] cfg80211: World regulatory domain updated:
[ 45.739178] cfg80211: DFS Master region: unset
[ 45.743545] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 45.753344] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 45.761400] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 45.769451] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 45.777513] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 45.787050] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 45.796582] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 45.804694] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 45.812749] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 46.028617] PPP generic driver version 2.4.2
[ 46.050074] NET: Registered protocol family 24
[ 72.507229] NPE-B: firmware's license can be found in /usr/share/doc/LICENSE.IPL
[ 72.514669] NPE-B: firmware functionality 0x2, revision 0x2:1
[ 72.522864] eth0: link up, speed 0 Mb/s, full duplex
[ 72.578507] device eth0 entered promiscuous mode
[ 72.619114] br-lan: port 1(eth0) entered forwarding state
[ 72.624611] br-lan: port 1(eth0) entered forwarding state
[ 74.616661] br-lan: port 1(eth0) entered forwarding state
[ 81.436715] random: nonblocking pool is initialized
[ 93.097456] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 93.104454] jffs2_build_filesystem(): unlocking the mtd device... done.
[ 120.681143] jffs2_build_filesystem(): erasing all blocks after the end marker... done.
[ 237.841450] jffs2: notice: (2041) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 de.
BusyBox v1.23.2 (2015-09-07 16:05:31 CEST) built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
CHAOS CALMER (Bleeding Edge, r46802)
-----------------------------------------------------
* 1 1/2 oz Gin Shake with a glassful
* 1/4 oz Triple Sec of broken ice and pour
* 3/4 oz Lime Juice unstrained into a goblet.
* 1 1/2 oz Orange Juice
* 1 tsp. Grenadine Syrup
-----------------------------------------------------
root@OpenWrt:/# df -h
Filesystem Size Used Available Use% Mounted on
rootfs 12.5M 656.0K 11.9M 5% /
/dev/root 1.8M 1.8M 0 100% /rom
tmpfs 14.2M 48.0K 14.1M 0% /tmp
tmpfs 14.2M 32.0K 14.1M 0% /tmp/root
tmpfs 512.0K 0 512.0K 0% /dev
/dev/mtdblock3 12.5M 656.0K 11.9M 5% /overlay
overlayfs:/overlay 12.5M 656.0K 11.9M 5% /
root@OpenWrt:/# reboot
root@OpenWrt:/#
[ 386.067388] br-lan: port 1(eth0) entered disabled state
[ 386.077435] device eth0 left promiscuous mode
[ 386.081977] br-lan: port 1(eth0) entered disabled state
[ 386.097317] eth0: link down
[ 386.102297] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 390.450188] reboot: Restarting system
Finishing up:
Now all is left is re-configure redboot so it automatically boots to openWRT.+starting api entry Ethernet eth0: MAC address 00:03:47:df:32:a8 IP: 192.168.0.190/255.255.255.0, Gateway: 192.168.0.1 Default server: 192.168.0.180, DNS server IP: 8.8.8.8 RedBoot(tm) bootstrap and debug environment [ROM] Red Hat certified release, version 1.92p1 - built 14:07:09, Oct 8 2004 Bootloader version 1 Platform: Intel Generic Residential Gateway (XScale) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x02000000, 0x0001e5c0-0x01fdd000 available FLASH: 0x50000000 - 0x51000000, 128 blocks of 0x00020000 bytes each. RedBoot> fconfig Run script at boot: true Boot script: Enter script, terminate with empty line >> fis load zImage >> exec >> Boot script timeout (1000ms resolution): 10 Use BOOTP for network configuration: false Gateway IP address: 192.168.0.1 Local IP address: 192.168.0.190 Local IP address mask: 255.255.255.0 Product Info: WGR826V Default server IP address: 192.168.0.180 Version Info: 1 Console baud rate: 115200 DNS server IP address: 8.8.8.8 GDB connection port: 9000 Force console for special debug messages: false Network debug at boot time: false Default network device: npe_eth0 Network hardware address [MAC] for NPE eth0: 0x00:0x03:0x47:0xDF:0x32:0xA8 Network hardware address [MAC] for NPE eth1: 0x00:0x03:0x47:0xDF:0x32:0xAA ... Unlock from 0x50fc0000-0x50fc1000: . ... Erase from 0x50fc0000-0x50fc1000: . ... Program from 0x01fde000-0x01fdf000 at 0x50fc0000: . ... Lock from 0x50fc0000-0x50fc1000: . RedBoot> reset
Now what?:
There are a few things that need to be done to have an usable router.
- Change the IP to match your LAN:
Use the command: vi /etc/config/network
For more information visit: http://wiki.openwrt.org/doc/uci/network
- Change the IP to match your LAN:
Use the command: vi /etc/config/network
For more information visit: http://wiki.openwrt.org/doc/uci/network
*My router is connected to my home LAN so I had to add the gateway for this to work.
- Install modules for WIFI:
Use the commands:
opkg update
opkg install kmod-rt2500-pci
reboot
Use the commands:
opkg update
opkg install kmod-rt2500-pci
reboot
- Connect to the web interface:
With Luci up you can change pretty much anything you want like any router in the market.For more information visit: http://wiki.openwrt.org/doc/howto/luci.essentials
With Luci up you can change pretty much anything you want like any router in the market.For more information visit: http://wiki.openwrt.org/doc/howto/luci.essentials
Now you are at a good starting point. I will look into getting the FXS chip working, but at this point I have no hope.
Feel free to leave comments below.
1 comment:
How do we work together on this? I have one which I'm currently using as a WiFi Router with stock FW.
I haven't set up a bench or anything yet.
I have some JTAG controllers from a previous job but likely don't have what I need for this Intel processor. May have to buy something (sometimes really cheap from eBay, etc.). Any/all setup info would be helpful. (just zip up your whole source and working directory if you're willing?)
Please contact me.
--Ski
Post a Comment